Skip to content
Research Article Open access CC BY 4.0

Modelling the Effects of Temperature and Pressure on Equivalent Circulating Density (ECD) During Drilling Operations Using Artificial Neural Networks

Stanley Ifeanyi Fredrick Okonkwo, Ogbonna Friday Joel

Journal of Engineering Research and Reports · pp. 70–82 · Published 26 Sep 2023

10.9734/jerr/2023/v25i9982

Abstract

Incorrect evaluation of equivalent circulating density (ECD) while drilling oil and gas wells may result in drilling problems such as lost circulation, kicks, differential pipe sticking etc especially in narrow drilling margins. Due to the incompressible nature of liquids, increase in wellbore pressure will only have appreciable effect on the fluid rheology at higher pressures, whereas a small increase in temperature may cause a decrease in the rheology. One thousand and eleven (1,011) field data obtained from high pressure; high temperature (HPHT) wells were used to develop artificial neural networks (ANNs) for this study. Training data were used to train the network while validation data were used to guarantee that the network generalizes at the training stage. Test data were used to evaluate the prediction capability of the developed model. Four error metrics, namely R-square (R2), mean square error (MSE), root mean square error (RMSE) and average absolute percentage error (AAPE) were used to assess the performance of the developed networks. Forecasts from the testing data indicate the optimized ECD model produced a prediction accuracy; R2 of 0.9993, MSE of 0.000265, RMSE of 0.01628 and AAPE of 0.337. The optimized ECD model performed better than existing ECD models in terms of the prediction accuracy and the calculated errors. The developed ECD model will help in improving the ECD prediction during the pre-drill design phase, which is quite critical in narrow drilling margin wells.

Equivalent circulating density Artificial Neural Networks (ANNs) model prediction High Pressure High Temperature (HPHT) error metrics

References (17)

  1. 1 Process mining: a two-step approach to balance between underfitting and overfitting [DOI]
  2. 2 Multiple regression and Artificial Neural Network for long-term rainfall forecasting using large scale climate modes [DOI]
  3. 3 Comparison of multivariate adaptive regression splines with coupled wavelet transform artificial neural networks for runoff forecasting in Himalayan micro-watersheds with limited data [DOI]
  4. 4 Artificial intelligence techniques and their applications in drilling fluid engineering: A review [DOI]
  5. 5 HPHT 101 - What Every Engineer or Geoscientist Should Know about High Pressure High Temperature Wells [DOI]
  6. 6 Temperature and Pressure Effects on Drilling Fluid Rheology and ECD in Very Deep Wells [DOI]
  7. 7 Estimation of lost circulation amount occurs during under balanced drilling using drilling data and neural network [DOI]
  8. 8 New Technology to Evaluate Equivalent Circulating Density While Drilling Using Artificial Intelligence [DOI]
  9. 9 Impact of hole cleaning and drilling performance on the equivalent circulating density [DOI]
  10. 10 A Developed Robust Model and Artificial Intelligence Techniques to Predict Drilling Fluid Density and Equivalent Circulation Density in Real Time [DOI]
  11. 11 Prediction of the equivalent circulation density using machine learning algorithms based on real-time data [DOI]
  12. 12 Accurate Estimation of Equivalent Circulating Density During High Pressure High Temperature (HPHT) Drilling Operations [DOI]
  13. 13 Investigating the Impact of the "Tool Joint Effect" on Equivalent Circulating Density in Deep-Water Wells [DOI]
  14. 14 Effectiveness of Simulations on Well Control During HPHT Well Drilling [DOI]
  15. 15 Drilling Data Based Approach for Equivalent Circulation Density Prediction While Drilling [DOI]
  16. 16 Journal of Petroleum Science and Engineering
  17. 17 Investigation on the effects of ultra-high pressure and temperature on the rheological properties of oil-based drilling fluids

Cited by 6

Innovative machine learning for drilling fluid density prediction: a novel central force search-adaptive XGBoost in HPHT environments

G. Shanmugasundar, R. Manjunatha, Robert Cep · Frontiers in Energy Research · 2024

Predicting drilling mud equivalent circulating density with precision: A critical review of modern approaches

Okorie Ekwe Agwu, Saad Alatefi, Muhammad Aslam Md Yusof · Petroleum · 2025

Study on the Equivalent Density Tool and Depressurisation Mechanism of Suction-Type Depressurisation Cycle

Meipeng Ren, Xingquan Zhang, Renjun Xie · Processes · 2024

Showing 3 of 6 known citations — external sources report more than can currently be individually listed.

Related research

Article metrics

Real usage data collected on this platform.

14

Page views

0

PDF downloads

1

Outbound clicks

6

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.