Skip to content
Research Article Open access CC BY 4.0

Physiognomies and Strength Investigation of Concrete Part Blended by Wood Ash

Smruti Saswati Dash, Siba Prasad Mishra, Sagarika Panda

International Journal of Environment and Climate Change · pp. 143–155 · Published 20 Jul 2021

10.9734/ijecc/2021/v11i530416

Abstract

Introduction: Cement during its manufacture emits enormous CO2, and heat to the atmosphere and deteriorate the environment affecting its sustainability. Wood ashes (WA) are the by-products wood based power plants, timber mills as wood dust, barks from forestry, paper industry, and forest fire are simple wastes and are noxious to atmosphere. Present study is investigating the strength and durability of concrete when blended with 0%, 10%, 30%, and 40% wood ash replacing cement to have these wastes effective waste management. Methodology: The process of investigation is to find the chemical constituents of fly ash, and its suitability to part substitute cement by using X-ray fluorescent spectrometer (XRF), and digital compressive testing machine (CTM) and Universal Testing Machine (UTM) to verify the physical, chemical, and mechanical properties to assess appropriate strength of wood ash blended concrete (WABC). Results: Strength characteristic at various proportion of mix of (WABC) on testing exhibited decreasing trend on increasing WA percent. The blended concrete exhibited the required compressive strength at 10% addition of WA and after curing for 28days. By utilizing wood ash as cement substitute the environment can be saved from black carbon and further deterioration. 

Cement substitute Strengths of concrete Wood ash UTM XRF-Spectrometer volatile matter furnace

References (10)

  1. 1 Rice husk ash as an alternate source for active silica production [DOI]
  2. 2 Development of corn cob ash blended cement [DOI]
  3. 3 Recycling and disposing of wood ash
  4. 4 A study of the permeability and acid attack of corn cob ash blended cements [DOI]
  5. 5 Effect of coal ash and rice husk ash partial replacement in ordinary Portland cement on pervious concrete [DOI]
  6. 6 Strength and durability of cement with forest waste bottom ash [DOI]
  7. 7 Effects of Wood Ash on Properties of Concrete and Flowable Fill [DOI]
  8. 8 WOOD ASH AS AN EFFECTIVE RAW MATERIAL FOR CONCRETE BLOCKS [DOI]
  9. 9 Partial Replacement of Wood Ash with Ordinary Portland Cement and Foundry Sand as Fine Aggregate [DOI]
  10. 10 Density and Strength of Mortar Made with the Mixture of Wood Ash, Crushed Gneiss and River Sand as Fine Aggregate [DOI]

Cited by 2

A Review on Strength and Durability Properties of Wooden Ash Based Concrete

B. Al-kharabsheh, Mohamed Moafak Arbili, Ali Majdi · Materials · 2022

An Experimental Study on the Total and Capillary Water Absorption of Mortar Containing Phragmites Australis Ash

W. Lelian, ElKhatib, Jamal Khatib

Related research

Article metrics

Real usage data collected on this platform.

40

Page views

0

PDF downloads

4

Outbound clicks

2

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.