Skip to content

All published articles 1996

Numerical and Experimental Investigation on Performance of Convex-Cut Baffles in Shell-and-Tube Heat Exchanger

Moses Omolayo Petinrin & Ademola Adebukola Dare · Journal of Engineering Research and Reports · 2020

In this study, comparative performance of single-segmental baffle and a newly developed baffle – convex-cut in shell-and-tube heat exchanger were both numerically and experimentally investigated. For the numerical analysis, three working fluids (engine oil, water and air) were su...

Open access Research Article 10.9734/jerr/2020/v13i317101

CFD Analysis of Smoke and Temperature Control System of Car Park Area with Jet Fans

M. T. Çakir & Ç. Ün · Journal of Engineering Research and Reports · 2020

Basements of hospitals are generally used as indoor parking area.  When underground car parks are examined physically, it is not possible to ventilate them by natural roads. Therefore, in order to keep the density of harmful gases below certain limits; ventilation systems must be...

Open access Research Article 10.9734/jerr/2020/v13i317102

Intensifying Cross-border Logistics Collaboration Opportunities Using a Virtual Logistics Center

Péter Tamás, Béla Illés, Tamás Bányai, Agota Banyaine Toth, Umetaliev Akylbek & Robert Skapinyecz · Journal of Engineering Research and Reports · 2020

There are a number of untapped opportunities for cross-border logistics cooperation, one of which is the operation of virtual logistics centers. The Institute of Logistics of the University of Miskolc researched the possibilities of establishing and operating Virtual Logistics Ce...

Open access Research Article 10.9734/jerr/2020/v13i317100

Early Breast Cancer Prediction using Artificial Intelligence Methods

Shawni Dutta & Samir Kumar Bandyopadhyay · Journal of Engineering Research and Reports · 2020

In India, the death toll due to breast cancer is increasing at a rapid pace. Only early detection and diagnosis is the way of control but it is a major challenge in India due to lack of awareness and lethargy of Indian womentowards health care and regular check-up. But the major...

Open access Research Article 10.9734/jerr/2020/v13i217105

The Role of Augmented and Virtual Reality Technologies in Developing Logistics Processes

Péter Veres, Ákos Cservenák, Robert Skapinyecz, Béla Illés, Tamás Bányai, Umetaliev Akylbek & Péter Tamás · Journal of Engineering Research and Reports · 2020

Nowadays, manufacturing and service companies are increasingly using new IT-based methods and solutions. Two of these areas are the use of augmented reality (AR) and virtual reality (VR). Kyrgyz National Agrarian University named after K.I. Skrybian (KNAU) and Kyrgyz State Techni...

Open access Research Article 10.9734/jerr/2020/v13i217107

Advanced Semiconductor Design through Specialized Printable Conductive Layer

Rennier Rodriguez, Frederick Ray Gomez & Maiden Grace Maming · Journal of Engineering Research and Reports · 2020

Semiconductor package miniaturization and thinning have become of particular interest among semiconductor manufacturing industries, with each manufacturing company having specific approach and technical directions in providing unique solutions in their products. The paper provide...

Open access Research Article 10.9734/jerr/2020/v13i217099

Experimental and Analytical Investigations of Innovative Composite Materials Using GFRP and Iron Slag for Railway Sleepers

Ali S. Shanour, Ahmed Abdelmoamen Khalil, Hany Sobhy Riad & Heba Mahmoud Bakry · Journal of Engineering Research and Reports · 2020

This paper presents further results of experimental testing and analytical investigation on the mechanical properties of fiber composite sleeper in order to evaluate its strength and behavior. Recycled high density polyethylene, iron slag, calcium carbonate, styrene and polyester...

Open access Research Article 10.9734/jerr/2020/v13i217098

Simple Optical Measurements of Pre-treated Surface Roughness for Thermal Spray

Yukihiko Yamagata, Ryo Iwasaka, Keita Shigyo, Juntaro Tanaka, Yasuyuki Kawaguchi & Katsunori Muraoka · Journal of Engineering Research and Reports · 2020

For achieving satisfactory performance of coating layers obtained using the thermal spray technique, pre-treatments are carried out by roughening the smooth surfaces of metals to more than a few tens of μm.  Although a surface roughness tester is reliable for quantitatively measu...

Open access Research Article 10.9734/jerr/2020/v13i217095

Leachate Characterization from Municipal Solid Waste Dump Site and Its Adverse Impacts on Surface Water Quality Downstream - Uyo Village Road, Akwa Ibom State - Nigeria

S. A. Nta, M. J. Ayotamuno, A. H. Igoni & R. N. Okparanma · Journal of Engineering Research and Reports · 2020

The present investigation discusses the characteristic of leachate generated from municipal solid waste landfill and it adverse impacts on downstream water quality. Landfill leachate was collected from a hole dug 10 m away from the waste dump site and the appearance of the leacha...

Open access Research Article 10.9734/jerr/2020/v13i217096

Performance of Trickle Irrigation System on Growth and Yield of Garlic in Case Rabi and Kharif Seasons, Wonkakebele, Ethiopia

Dessie Gieta Amare · Journal of Engineering Research and Reports · 2020

Trickle irrigation is one and only of the water saving, progressive and advanced irrigation methods over gravity irrigation. In the point view of this, the research was lead to study the efficiency of Trickle irrigation over gravity irrigation in growth and yield of garlic in cas...

Open access Research Article 10.9734/jerr/2020/v13i117094

Clients Versus Consultants Assessment of Project Success in Nigeria

Ayodele Emmanuel, Ikudayisi & Akugbe Collins, Oviasogie · Journal of Engineering Research and Reports · 2020

The effectiveness of project delivery depends largely on the collaboration of the project actors. Yet the perception of success might be subjective and dependent on the individual’s opinion. This study assessed project success from clients versus consultants’ perspective. A cross...

Open access Research Article 10.9734/jerr/2020/v13i117093

A Review on Performance of Rice De-stoning Machines

O. A. Adetola & D. L. Akindahunsi · Journal of Engineering Research and Reports · 2020

The major challenge in Nigerian rice industry is poor processing which allows contaminants such as stone pebbles to be introduced during harvesting and post-harvest handling. Despite the several efforts of various researchers in Nigeria, no commercial rice de-stoning machine is a...

Open access Research Article 10.9734/jerr/2020/v13i117090

An Attempt to Modify the Crop Coefficient Value of Wheat and Chickpea for Humid Subtropical Climate of Varanasi District, Uttar Pradesh

Chandra Kishor Kumar, Gaurav Sharma & Anshu Gangwar · Journal of Engineering Research and Reports · 2020

Crop water requirement is one of the essential components that should always be taken into account wherever water management strategies are adopted for effective utilization of water. In India agriculture is considered as the backbone of economy but nothing technical or advance t...

Open access Research Article 10.9734/jerr/2020/v13i117091

Wind Analysis of High-Rise Building Resting on Sloping (Hilly) Grounds of Federal Capital Territory, Abuja, Nigeria

Roy O. Ononye, Kevin C. Okolie, F. O. Ezeokoli & S. C. Ugochukwu · Journal of Engineering Research and Reports · 2020

The importance of wind induced vibration is a key factor in the analysis, design and construction of high-rise building structures. Owing to scarce land resources, urbanization and ever-growing demand for accommodation is leading developers into sloping (hilly) grounds which in t...

Open access Research Article 10.9734/jerr/2020/v13i117092