Skip to content
Research Article Open access CC BY 4.0

Appraisal of Structural Integrity Assessment Methodology and Reports of Existing RC Building Structures in Ghana

Sampson Agudze, Vincent K. Akortia, Charles K. Kankam, Evans Biney, John K. Quarm Junior, Edward C. Mansar

Journal of Engineering Research and Reports · pp. 81–101 · Published 28 Oct 2023

10.9734/jerr/2023/v25i101003

Abstract

This study reviewed eighty-three (83) structural integrity reports obtained from two (2) Metropolitan and six (6) Municipal Assemblies in the Greater Accra Region of Ghana to ascertain the availability of national standard assessment methodology and reporting format for structural integrity assessment of existing building structures in Ghana, evaluate test methods and techniques used in the assessment, and ascertain justification for recommended intervention levels. A case study with a special form/instrument was designed to collect the required data from the reviewed reports in response to the study objectives. The study revealed that there are no national standards or published guidelines available for a methodology for structural integrity assessment and reporting format for existing building structures in Ghana, resulting in a wide variation in the reporting structure by experts or consultants. The most widely used test methods and techniques (and their frequency of use) were visual inspections (100%), Non-Destructive Tests by Schmidt Hammer (95%), Covermeter (40%), Dynamic Cone Penetration Test (DCPT) (48%), and Trial Pits (55%); however, equipment specifications for the test methods and techniques were generally not stated in the reports. The justification for the assessments was largely for structural adequacy and safety assessment for regularization (code compliance), repair, rehabilitation, upgrading, extension or change of use. While only 31% of the reports reviewed provided information on analysis and design calculations, most reports recommended a ‘safe structure’ irrespective of the depth/adequacy of investigation and information provided in the reports. A national standard reporting format was therefore developed and recommended for adoption in the activity of Structural Integrity Assessment and reporting for existing RC building structures in Ghana and beyond.

Structural integrity national reports guidelines standards assessment test methods

References (9)

  1. 1 Testing of Concrete in Structures [DOI]
  2. 2 Structural Adjustment and Emerging Urban Form in Accra, Ghana [DOI]
  3. 3 Compilation of the GSHAP regional seismic hazard for Europe, Africa and the Middle East [DOI]
  4. 4 Urbanisation in Ghana: Residential land use under siege in Kumasi central [DOI]
  5. 5 Probabilistic seismic hazard assessment of southern part of Ghana [DOI]
  6. 6 Guideline for the assessment of existing structures
  7. 7 The Challenge of Reducing the Incidence of Building Collapse in Ghana: Analyzing the Perspectives of Building Inspectors in Kumasi [DOI]
  8. 8 Guideline for Structural Condition Assessment of Existing Buildings [DOI]
  9. 9 Test Method for Rebound Number of Hardened Concrete [DOI]

Cited by 0

No indexed citations yet.

Related research

Article metrics

Real usage data collected on this platform.

34

Page views

0

PDF downloads

5

Outbound clicks

0

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.