Morphometric Study of Dhatarwadi River Basin Using RS and GIS Techniques

Abstract

Aims: Morphometric study of Dhatarwadi river basin. Place and Duration of Study: This study is a work done for the research work in Ph.D. degree at College of Agricultural Engineering and Technology, Junagadh Agricultural University, Junagadh, Gujarat, India. Methodology: Morphometric analysis involved determination of linear, aerial and relief aspects of the Dhatarwadi river basin, which was carried out using 30 X 30 m SRTM DEM in ArcGIS 10.5 software using standard formulae. Results: The obtained results revealed that the Dhatarwadi river basin is 6th order drainage basin. The total number of 1327 streams were identified out of which 1st, 2nd, 3rd, 4th, 5th and 6th order streams are counted as 1036, 239, 42, 7, 2 and 1 number, respectively. The mean bifurcation ratio value is 4.31 for the study area which indicates that the geological structures are not distorting the drainage pattern. Stream length ratio varies between 0.14 and 2.14 indicates late youth geomorphic stage. The length of overland flow was found as 0.3084 km which also indicates very less structural disturbance, low runoff conditions and having higher overland flow. The stream frequency of the basin is 1.5448 km-2, indicates that this basin is having high permeable geology, low relief and the almost flat topography. The form factor, elongation ratio, circularity ratio and compactness coefficient are found as 0.3951, 0.7094, 0.3126 and 1.7882, respectively of the study basin is suggests that the Dhatarwadi river basin shape is elongated. The drainage texture is 7.1426 km-1 which shows that the Dhatarwadi river basin has short duration for peak flow. The relief, relief ratio and relative ratio of the basin are found as 0.438 km, 0.009372 and 0.2352, respectively. Conclusion: All these parameters indicate that the Dhatarwadi river basin is of flat terrain with small hillocks/inselbergs having low to medium runoff potential.