Skip to content

All published articles 1996

Health Risk Assessment of Heavy Metals in Groundwater Used for Domestic Purposes in Eket Metropolis, Akwa Ibom State, Nigeria

Samuel Akpan Nta & Erewari Ukoha-Onuoha · Journal of Engineering Research and Reports · 2026

Groundwater is the principal source of water for domestic purposes in many parts of Eket Metropolis, Akwa Ibom State, Nigeria, and its quality is therefore relevant to public health. This study presents a health risk assessment of heavy metals in groundwater used for domestic pur...

Open access Research Article 10.9734/jerr/2026/v28i81980

Mixed Convection MHD Flow of an Eyring-powell Nanofluid over a Cone with Radiative Heat Transfer and Exponential Internal Heat Generation

Manjula K. M. & D. K. Jyoti · Journal of Engineering Research and Reports · 2026

The present study investigates the magnetohydrodynamic (MHD) mixed convection flow and heat transfer characteristics of an Eyring-Powell nanofluid over a cone in the presence of nonlinear thermal buoyancy, thermal radiation, Brownian motion, thermophoresis, temperature-dependent...

Open access Research Article 10.9734/jerr/2026/v28i81981

Optimal Placement and Sizing of Static Var Compensators on the Nigerian 330 kV Transmission Network: A Comparative Study of Genetic Algorithm, Particle Swarm Optimization, and a Hybrid Approach

Ndubuisi V. Irokwe, Nseobong I. Okpura, Kufre M. Udofia & Jimoh J. Afolayan · Journal of Engineering Research and Reports · 2026

This study addresses voltage instability in developing-economy transmission grids by determining the optimal placement and sizing of Static Var Compensators (SVCs) on the Nigerian 330 kV, 50-bus network. Although metaheuristic techniques have been widely applied to FACTS device a...

Open access Research Article 10.9734/jerr/2026/v28i81976

Development of A Multiparametric Model Predictive Control System for Temperature Regulation of a Window - Type Air Conditioner

D. O. Aborisade, O. A. Adegbola, S. O. Oladeji, T. P. Ajayi, A.S. Adekanmi & H.B. Omodeni · Journal of Engineering Research and Reports · 2026

Aims/Objectives: This study aimed to develop a multiparametric Model Predictive Control (mp-MPC) framework for the thermal regulation of a single-zone space conditioned by a window-type air-conditioning (AC) unit. The framework shifts the optimisation burden offline so that an ex...

Open access Research Article 10.9734/jerr/2026/v28i81977

Design and Experimental Study of an Indirect Forced Convection PV/T Solar Dryer in a Humid Tropical Zone

Francis Mbele, Thomas Djiako, Alexis Kuitche, Orelien T. Boupda, Frederic Lontsi & Ruben M. Mouangue · Journal of Engineering Research and Reports · 2026

Ginger is highly perishable because of its high moisture content, and conventional sun drying is often constrained by variable weather conditions, contamination, and prolonged drying periods. Indirect forced-convection photovoltaic/thermal solar dryers offer a promising approach...

Open access Research Article 10.9734/jerr/2026/v28i81978

Research Progress on EPC General Contracting Mode in China

Li Yang, Xin Zhao, Feng Liang, Song Hu & Zhiyuan Tian · Journal of Engineering Research and Reports · 2026

Engineering–procurement–construction (EPC) general contracting has become an important instrument in China’s effort to reorganise project delivery around integrated responsibility for design, procurement and construction. Its expansion has been encouraged by national rules that c...

Open access Research Article 10.9734/jerr/2026/v28i81975

MXene Sheet Size as a Synthesis-encoded Variable: A Critical Review of Processing–Structure–Property Relationships

Francis Mekunye · Journal of Engineering Research and Reports · 2026

MXenes are solution-processable two-dimensional carbides and nitrides whose macroscopic performance is often attributed to composition and surface terminations, while the lateral dimensions of individual sheets are treated as a secondary processing detail. This review critically...

Open access Research Article 10.9734/jerr/2026/v28i81973

Industrial Sector Decarbonization Pathways for Cement, Iron and Steel, and Chemical Industries in Nigeria

Agnes Oboh, Fidelis Abam, Anthony Obi & Ugwu Hyginus Ubabuike · Journal of Engineering Research and Reports · 2026

Nigeria's cement, iron and steel, and chemical industries account for a substantial share of the country's industrial energy use. This study applies the Low Emissions Analysis Platform (LEAP) to project industrial energy demand and greenhouse gas emissions to 2060 under four scen...

Open access Research Article 10.9734/jerr/2026/v28i81974

Modelling of Flash Flood Mitigation through Flow Diversion: A Case Study of the Teesta River Basin, Bangladesh

Eisteuck Ahmed, Mitu Khatun, B. M. Mustasim Billah & Md. Asif Hossen · Journal of Engineering Research and Reports · 2026

Flooding remains one of the most devastating natural hazards in Bangladesh, particularly in the northern riverine regions, where transboundary water-management issues exacerbate vulnerability. This study presents a proof-of-concept computational fluid dynamics (CFD) analysis cond...

Open access Research Article 10.9734/jerr/2026/v28i81972

Microstructure–Durability Relationships in Recycled Concrete: A Critical Review of Scanning Electron Microscopy Evidence on Pore Structure, Hydration Products and Interfacial Bonding

HongKang Yue · Journal of Engineering Research and Reports · 2026

Recycled aggregate concrete (RAC) offers a route to reducing the extraction of natural aggregate and the landfilling of construction and demolition waste, yet its uptake in durability-critical applications remains constrained by uncertainty over long-term performance. The behavio...

Open access Research Article 10.9734/jerr/2026/v28i81970

Application of AI-based Intelligent Control Methods for Enhancing Product Quality in Glass Manufacturing

Omar Musazade & Stanislav Aghamatov · Journal of Engineering Research and Reports · 2026

Aims: This research aims to advance industrial glass manufacturing by implementing a next-generation autonomous control architecture. The study focuses on maximising energy efficiency and product quality by integrating Digital Twin technology, Deep Reinforcement Learning (DRL), a...

Open access Research Article 10.9734/jerr/2026/v28i81971

Optimizing Steel Fiber and Nano-CaCO3 in Recycled Aggregate Concrete

Md. Rejoan Chowdhury, S. M. Saif Hasan Nirob, Rafi Ahammed Shuva, Afroja Akter, Md. Habibullah, Md. Shaon Akon, Golam Safayat & Md. Fahim Hossain · Journal of Engineering Research and Reports · 2026

The use of recycled aggregate can reduce dependence on natural stone, while steel fibres may improve the mechanical performance of concrete containing recycled materials. This study evaluated the workability, compressive strength, and splitting tensile strength of concrete incorp...

Open access Research Article 10.9734/jerr/2026/v28i71969

Integration of CCTV and IoT Sensors for Context-aware Intelligent Surveillance Systems

Osita Miracle Nwakeze, Ugoji Frank-Godric Chidubem, Nwafor Anthony Chigozie, Naveed Uddin Mohammed, Oboti Nwamaka Peace & Ogochukwu Patience Okechukwu · Journal of Engineering Research and Reports · 2026

The growing demand for smarter and more dependable surveillance systems has driven the integration of advanced technologies capable of providing real-time situational awareness and accurate anomaly detection. Conventional Closed-Circuit Television (CCTV) systems are typically con...

Open access Research Article 10.9734/jerr/2026/v28i71968

Environmental Assessment of Hybrid Power Generation in Industrial Zones of Ibadan: Case Studies of Oluyole and Dugbe

D. A. Oke, S. B. Raheem, G. F. Oladiran, K. A. Apanpa & R. A. Oduleke · Journal of Engineering Research and Reports · 2026

Hybrid power systems are increasingly used to improve electricity reliability in Nigerian industrial areas, but their site-level environmental implications remain insufficiently documented. This study evaluates the environmental impacts of hybrid power generation systems in the i...

Open access Research Article 10.9734/jerr/2026/v28i71967

Comparative Evaluation of Compressive Strength of Concrete Produced with Granite and Gravel as Coarse Aggregates

Mohammed O. Ganiyu & Udeh Israel Eyu · Journal of Engineering Research and Reports · 2026

This study evaluated the influence of coarse aggregate type on the compressive strength of concrete, with particular emphasis on granite and locally sourced gravel. Concrete performance is largely governed by the properties of its constituent materials, among which coarse aggrega...

Open access Research Article 10.9734/jerr/2026/v28i71965